Welcome to Saburrtooth Power Carving Tools
Saburrtooth® rotary tools feature long-lasting, razor-sharp carbide cutting teeth arranged into a unique open pattern to resist loading while providing rapid stock removal and smoother finishes. Rotary tools are available in many shapes, sizes and textures to suit your carving, grinding, cutting and machining needs.
These carbide coated tools are prefect for carving large bonsai trees as well as a host of DIY projects, industrial and artistic uses. Saburrtooth wheels cut just about any material including....
- SOAP STONE
Using the latest materials technology, tungsten carbide teeth are fused to the steel backing material. The tool is then coated with a very special material that dramatically reduces loading (clogging up of the teeth) when used with soft materials like wood. The result is a dramatic performance improvement over similar products.
In use Saburrtooth wheels offer unbelievably smooth and effortless stock removal. Wood just disappears before your eyes, with virtually no pressure applied to your power tool. That leaves you free to concentrate on bringing your imagination to life. The final finish from these tools is a rough sanded texture that can then be detailed with much smaller tools in the normal way. Harder woods will give a smoother finish than very soft wood.
These Saburrtooth wood carving burrs have a 6mm shaft than fits most large die grinders similar to the Makita GD0600, our Variable Speed Die Grinder and Foredom Flexible Shaft Machines. These burrs combine superb stock removal rate with a minimum of loading (clogging up) whilst being extremely controllable, even if you have never used power tools for wood carving before you will feel right at home and safe with Saburrtooth wood carving burrs.
Because the swarf produced is tiny chips and dust it will not damage foliage of trees in the way that chip carving tools can. You can expect a very long life from these incredible tools!
The variety of shapes we offer gives a wide range of cut and shaping options and should meet the needs of most wood carvers.
You can expect many years of work from these well engineered USA made high quality tools.
"I was a bit sceptical about the use of these tools at first but quickly discovered just how brilliant they are. They're now a permanent addition to my tool box!" Graham Potter.
Coarse (green) grade abrasive gives a very rapid cut rate with a good finish on hard and soft wood.
Maximum speed rating 25,000 RPM.
Tools can easily be cleaned using our Cutting Tool Cleaner.
6mm Shank to fit die grinder type machines.
Approximate cutting face dimensions…
Large bud 15mm diameter, 12mm head length, 55mm overall length.
Please select the option you require in the drop down list.
Available in two grades.
Yellow - Medium Grade
Green - Coarse Grade
- Additional Information