Saburrtooth® 2" Buzz Out Wheel 1/4" CLOSEOUT SPECIAL PRICE

In stock
As low as £36.45 £30.37
  • Saburrtooth® Buzz Out 2" carving wheel
  • 100% Made in the USA
  • Effortless carving of a huge range of materials
  • Three abrasive grades available
  • Select the grade wheel you need + a mandrel to mount in your power tool if required.
  • £5.45 price is for a mandrel ONLY and not a disk!

Welcome to Saburrtooth Power Carving Tools


Saburrtooth® rotary tools feature long-lasting, razor-sharp carbide cutting teeth arranged into a unique open pattern to resist loading while providing rapid stock removal and smoother finishes. Rotary tools are available in many shapes, sizes and textures to suit your carving, grinding, cutting and machining needs.

These carbide coated tools are prefect for carving large bonsai trees as well as a host of DIY projects, industrial and artistic uses. Saburrtooth wheels cut just about any material including....

  • WOOD
  • FOAM
  • BONE
  • ICE

Using the latest materials technology, tungsten carbide teeth are fused to the steel backing material. The tool is then coated with a very special material that dramatically reduces loading (clogging up of the teeth) when used with soft materials like wood. The result is a dramatic performance improvement over similar products.
In use Saburrtooth wheels offer unbelievably smooth and effortless stock removal. Wood just disappears before your eyes, with virtually no pressure applied to your power tool. That leaves you free to concentrate on bringing your imagination to life. The final finish from these tools is a rough sanded texture that can then be detailed with much smaller tools in the normal way. Harder woods will give a smoother finish than very soft wood.

The 2" (50mm) Saburrtooth wheel is a very versatile carving / shaping tool. It has an internal thread that may fit some power tools directly but is designed to be mounted in a chuck or collet using the 1/4" shaft arbor. In use this tool is perfect for roughing out large carving projects, internal or external shaping and surface finishing. The Buzz Out wheel has a rounded edge that cuts on the side as well as the face which allows cutting into the material and movement sideways too. 
Because the swarf produced is tiny chips and dust it will not damage foliage of trees in the way that chip carving tools can. You can expect a very long life from these incredible tools! 

Roughing out big carving projects can be tedious and time consuming but not with a 2" Saburrtooth Buzz Out wheel! 

Approximately 2" (50mm) overall diameter. Varies slightly with abrasive grade.

Approximately 1/4" wide cutting edge. Varies slightly with abrasive grade. 

3/8" x 24TPI thread. Requires an arbor to mount in die grinders, select from the drop down list.

Available in three grades. 

Yellow - Medium / Fine Grade 
Green - Coarse Grade
Orange - Extra Course

Please select the option you require in the drop down list.