Collet Brush Kit
One of the constant headaches of using power tools for carving work is changing bits, the collets have a tendency to jam solid and refuse to budge. Many good tools and bits get damaged by ham fisted attempts to release cutters using pliers, etc'. In order to alleviate this frustrating problem we offer you these very handy little brushes. Once in a while you should remove the retaining nut from the power tool and use the appropriate brush to scrub the inside of the collet. Next remove the collet carefully with needle nose pliers and use another brush to scrub out the mounting socket. Wipe all components with a lint free rag, wipe over a light coating of machine oil and re-assemble.

Life will be much easier following this simple procedure, time and tools saved!

Hard brass bristles won't scratch steel components. Very precisely engineered brushes designed specifically for the purpose.

1 each of 1/4" 6mm - 8mm - 3/8" - 1/2".

Read our guide on Important Information on Mounting Cutters in Power Tools