BONSAI BRANCH AND TRUNK BENDING JACK
Manufactured in Japan by Kikuwa this versatile screw jack can be used to easily pull or push when bending large branches or trunks. Use heavy rubber to cushion the contact points. Simply adjust the clamp to the desired position, place the cushioning beneath the arms and begin turning the screw to apply pressure. Creates a great deal of pressure to easily move large branches and trunks. The bend is achieved slowly to allow the wood to stretch thus reducing the likelihood of a bad break occurring. An easy safe way to make heavy bends if you are working alone. Once the desired position has been reached apply an adequate wire tourniquet to hold all in place and remove the clamp. This jack makes a usually strenuous task very simple!
Kikuwa brand, made in Japan.
36cm when fully closed.
Maximum spread/grasp 53cm.
Adjustable swivel arm at one end to allow easy alignment with branch/ trunk.